Run some papers through it to confirm that it’s in good working condition.Connect your machine to a wall socket, and turn it on.Put your shredder’s two compartments back together.Read: How To Fix A Paper Shredder That Won’t Turn On? 7. Once you find these sensors, clean them with a microfiber cloth or handheld vacuum. Note that the sensor might be in a covered spot, so you’ll need a flashlight. To find the sensors on your shredder, refer to your user manual. Overheat sensor: This detects when the shredder’s temperature goes above the acceptable limit.Bin sensor: This indicates when the bin section is full.Load protector sensor: This alerts you whenever there’s too much load in the machine.Door sensor: This lets you know if the paper bins aren’t attached properly.There are several types of shredder sensors depending on where they’re located on your machine. Read: Jammed Paper Shredder Won’t Feed Paper. Run at least three papers through the shredder to soak out excess oil.Switch the shredder to reverse mode and run for at least 30 seconds.This will spread the oil evenly along the blade. This will allow you to have better control over the direction of the blade. Grab a bottle of the recommended oil for the shredder.To do this process properly (i.e., avoid spilling oil onto unnecessary parts), follow these steps:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |